Sealed Without A Kiss (SWAK): Non-destructive testing of bonded assemblies
Adhesive joints are used to join structural elements in aircraft. Compared to the conventional structural joining techniques such as bolting, riveting and welding, adhesive joints minimize stress concentration and fatigue problems. Adhesive joints are susceptible to environmental degradation and manufacturing defects, hence it is imperative to use methods of inspection which provide information on these structural joints. In this project we focus mainly on a specific type of defect known as KISSING BOND defect.
A kissing bond is sometimes referred to as a zero-volume dis-bond between adhesive and adherend. In such defects, there is intimate solid-solid contact, and the dis-bond has no volume at the interface between adhesive and adherend. Furthermore, despite this intimate contact, there is no tensile strength across the interface. Together, these two factors make the dis-bond both very difficult to detect non-destructively, and very dangerous in that the joint strength is severely compromised. A zero-volume dis-bond can occur during joint manufacture due to poor preparation of the adherents. If adequate control of the adherend preparation is maintained, the occurrence of these types of dis-bond can be dramatically reduced. However, this type of kissing bond is difficult to produce intentionally. Hence a special method will be developed in this project out of extensive research.
The main objective of this project is to develop a manufacturing control procedure to generate Kissing Bond defects in bonded joints made out of composite materials and a non-destructive technique (NDT) to detect Kissing Bond defects in these samples. Different adherence models and NDT methods for different material bonded structures will be reviewed. Test samples are fabricated based on the review. Various NDT methods for bonded structures will be reviewed. An innovative NDT technique will be developed to detect Kissing Bonds defect.
- SWAK developed solutions based on NDT of adhesively bonded structures will reduce the usage of rivets and bolts, promoting the application of adhesives in aircraft structures and components, thus, will contribute to the reduction of weight overall that will reduce fuel consumption and will cut emissions ultimately.
- SWAK will have a direct impact on the safety of aircraft as it will enable zero defects NDT and mechanical testing techniques for bonded structures and geometries to be deployed in aircraft structures.
- SWAK will reduce the labour cost of products made of composites by reducing the number of assemblies. In turn it improves the strength of assembly while reducing number of parts.
Brunel Innovation Centre's Role
BIC takes part in the development of NDT technologies to detect kissing bond defects.
- GMI Aero
- TWI Ltd
- Brunel University London
Meet the Principal Investigator(s) for the project
Professor Tat-Hean Gan - Professional Qualifications CEng. IntPE (UK), Eur Ing BEng (Hons) Electrical and Electronics Engg (Uni of Nottingham) MSc in Advanced Mechanical Engineering (University of Warwick) MBA in International Business (University of Birmingham) PhD in Engineering (University of Warwick) Languages English, Malaysian, Mandarin, Cantonese Professional Bodies Fellow of the British Institute of NDT Fellow of the Institute of Engineering and Technology Tat-Hean Gan has 10 years of experience in Non-Destructive Testing (NDT), Structural Health Monitoring (SHM) and Condition Monitoring of rotating machineries in various industries namely nuclear, renewable energy (eg Wind, Wave ad Tidal), Oil and Gas, Petrochemical, Construction and Infrastructure, Aerospace and Automotive. He is the Director of BIC, leading activities varying from Research and development to commercialisation in the areas of novel technique development, sensor applications, signal and image processing, numerical modelling and electronics hardware. His experience is also in Collaborative funding (EC FP7 and UK TSB), project management and technology commercialisation.
Related Research Group(s)
Brunel Innovation Centre - A world-class research and technology centre that sits between the knowledge base and industry.
Partnering with confidence
Organisations interested in our research can partner with us with confidence backed by an external and independent benchmark: The Knowledge Exchange Framework. Read more.
Project last modified 25/02/2021